How Wide Should Curtains Be? A Simple Fullness Guide

Most curtains that look cheap are not cheap at all. They are simply too narrow. We see it often in Dubai apartments: a good fabric stretched flat across a balcony door, a gap of light at each side, and the whole curtain bunched over the glass when it is open. Getting the width right matters more than the fabric you pick.
This guide answers how wide should curtains be, in centimetres rather than inches, with worked examples for normal windows, sliding doors and wall-to-wall glass. It also covers fullness for each heading, how far the track should run past the window, and the UAE details most guides miss. For the full range of styles, see our ستائر القماش لدينا.
باختصارCurtains should be about two times the width of the track when flat, so they still look full when closed. Use 1.5 times for eyelet and a tailored look, 2 to 2.5 times for wave and pinch pleat, and 2.5 to 3 times for sheers. The track itself should run about 15 to 25 cm past each side of the window.
How wide should curtains be? The two widths that matter
When people ask how wide curtains should be, they usually mean one of two things, and mixing them up is where most mistakes start.
- Track or pole width: how far the curtain needs to reach. This is the window width plus an extension on each side.
- Fabric width: how much fabric goes onto that track, measured flat. This is the track width multiplied by the fullness.
So a 200 cm track at double fullness needs about 400 cm of flat fabric, split across the curtains. Made-to-measure curtains are worked out this way from the start. With ready-made curtains you have to do the sum yourself.
Fullness by curtain heading
Fullness is the ratio between flat fabric width and track width. It decides how deep the folds are. Too little and the curtain looks thin and flat when closed. Too much and it becomes heavy, stacks wide and blocks the view when open.
| الرأس | Typical fullness | الشكل |
|---|---|---|
| ويف | About 2 to 2.5 times | Even, soft S-shaped folds; stacks neatly |
| بكسرات (بينش بليت) (double) | 2 to 2.5 times | Tailored pleats with crisp folds |
| Triple pinch pleat | About 2.5 times | Deeper, more formal pleats |
| كسرات القلم (بنسل بليت) | 2 to 2.5 times | Gathered, relaxed and traditional |
| حلقات (آيليت) | 1.5 to 2 times | Large rounded folds on a pole |
| Sheer (any heading) | 2.5 to 3 times | Light fabric needs more folds to look full |
Wave and pinch pleat are the two headings we fit most in UAE homes. If you are choosing between them, our guide to ستائر ويف وستائر بكسرات compares the look, the stack and the track each one needs.
نصيحة احترافيةWith a sheer and a blackout layer on a double track, keep the sheer at the higher fullness. A sheer at 1.5 times looks like a net curtain; the same fabric at 2.5 to 3 times looks soft and expensive, and still costs less than the blackout layer.
How far past the window the track should go
A curtain needs somewhere to sit when it is open. That stacked fabric is called the stack-back. If the track stops at the edge of the window, the open curtain covers part of the glass and you lose light and view.
- Standard windows: run the track about 15 to 25 cm past each side of the frame.
- Heavy lined or blackout curtains: allow the upper end, as thicker fabric stacks wider.
- Blackout for sleep: the extra width also overlaps the wall, which stops light leaking round the sides.
- Two curtains meeting in the middle: ask for overlap arms on the track so the centre closes without a gap.
Height matters too. If you are also working out length, our guide on ما الطول المناسب للستائر covers floor clearance, ceiling heights and hems for each heading.
Worked examples in centimetres
Here is how the numbers work for common UAE window sizes, using 20 cm past each side and double fullness. The final fabric figure is shared between the curtains, so a pair splits it in half.
| Window width | Track width | Flat fabric at 2x | As a pair (each curtain) |
|---|---|---|---|
| 100 cm bedroom window | 140 cm | 280 cm | 140 cm each |
| 150 cm living room window | 190 cm | 380 cm | 190 cm each |
| 200 cm window | 240 cm | 480 cm | 240 cm each |
| 240 cm sliding door | 280 to 300 cm | 560 to 600 cm | 280 to 300 cm each |
| 400 cm wall-to-wall glass | Wall to wall | Track x 2 | Often split into 3 or 4 curtains |
Sheers on the same track would be about 25 to 50 percent wider again. When we measure, we take the track width first and let the heading set the fabric width, so you never have to do this sum yourself.

Sliding doors and wall-to-wall glass
Balcony and garden doors need extra thought, because the curtain must clear the door completely when it is open.
- One-way draw: on a single sliding door, have the curtain open to the side away from the moving panel. The whole stack then sits on the wall or over the fixed glass, not across the opening.
- Allow a generous stack-back: 25 to 30 cm past the frame on the opening side, so the door handle is never trapped behind fabric.
- Wall-to-wall glass: where there is no wall at the sides, the stack will always cover some glass. Wave curtains stack tighter than most headings, so they keep more of the view.
- Very wide spans: split the fabric into several curtains on one track. Each one is lighter to pull and easier to clean.
Motorised tracks work well on wide glass, because nobody has to drag several metres of fabric by hand. Our guide to الستائر الآلية في دبي explains how they are powered and controlled, and the الستائر الكهربائية page shows the options.
UAE details that change the width
| What you have | What it means for width | Our advice |
|---|---|---|
| Gypsum curtain pocket in the ceiling | Width is fixed by the pocket, usually wall to wall | Fill the pocket; choose wave so the stack stays slim |
| AC unit or cupboard beside the window | The track cannot run past that side | Make that side a one-way draw away from the obstacle |
| Window right in a corner | No wall for the stack on one side | Stack to the open side, or use a slim wave heading |
| Strong west or south sun | Light leaks at the sides feel harsher | Add 5 to 10 cm extra width each side on blackout |
| Sea-facing or high-floor view | Wide stacks hide the view | Extend the track further so curtains clear the glass |
نصيحة من Al SatayirIn many Dubai and Abu Dhabi apartments, the curtain pocket is built in by the developer, so the width question is already answered: the curtain goes wall to wall. The real choice is fullness. We usually suggest wave at about double fullness for the blackout layer and a fuller sheer in front, which keeps the stack slim enough that the glass is clear when everything is open.
Ready-made panels: are they wide enough?
Ready-made curtains are sold by the panel, often around 140 cm wide each. That sounds plenty until you do the fullness sum. Two 140 cm panels give 280 cm of fabric, which is double fullness for a track of only 140 cm. On a 240 cm sliding door you would need four panels for the same look.
That is why ready-made curtains on wide UAE windows often look flat. If you are weighing up the cost, a made-to-measure curtain is cut to the exact track and fullness, so you do not pay for extra panels or end up with a gap.
تجنّبDo not measure the glass and buy curtains to that width. You will end up with curtains that only just meet in the middle, look flat when closed, and cover part of the window when open. Always measure the track first, then multiply.
أهم النقاط
- Measure the track, not the glass, then multiply by the fullness.
- Double fullness suits most curtains; sheers need 2.5 to 3 times.
- Run the track 15 to 25 cm past each side so the curtain clears the window.
- On sliding doors, stack the curtain away from the moving panel.
- Gypsum pockets fix the width, so the real decision is the heading and fullness.
الأسئلة الشائعة
How wide should curtains be compared to the window?
Run the track about 15 to 25 cm past each side of the window, then make the curtains about two times that track width when flat. A 150 cm window gives a 190 cm track and about 380 cm of fabric.
Should curtains be wider than the window?
Yes. Curtains that only match the window width cover part of the glass when open and let light in at the sides when closed. Extending past the frame fixes both.
How wide should curtains be for a sliding glass door?
Extend the track 25 to 30 cm past the frame on the opening side, then use about double fullness. For a 240 cm door that usually means a track of 280 to 300 cm and around 560 to 600 cm of fabric.
Is double fullness too much?
Not for most curtains. Double fullness is the usual standard. Eyelet curtains and very thick fabrics can look good at 1.5 times, while sheers need more.
How many curtain panels do I need for a wide window?
Divide the total fabric width by the width of one panel. Two ready-made panels around 140 cm wide only give double fullness on a 140 cm track, so wide windows usually need four or more.
الخلاصة
Curtains should be about twice the width of the track, and the track should be wider than the window. Get those two numbers right and almost any fabric looks generous, closes without gaps and opens clear of the glass. In UAE homes, check for curtain pockets, AC units and sliding door handles before you settle on a width. If you would rather not do the sums, we measure every window on our free home visit and work out the width and fullness for you.
منتجات ذات صلة
ستائر ويف شيفونمن 130 درهم / م
ستائر بكسرات (بينش بليت)من 110 درهم / م
ستائر ويف شيفون وبلاك آوتمن 190 درهم / م (طقم)
ستائر حلقات بلاك آوتمن 100 درهم / مWant the width worked out for you?
Book a free home visit. We bring fabric samples, measure every window and track, and give you a clear quote with the right fullness for each room.
احجز زيارة مجانيةراسلنا على واتساب